Maybe darts could solve the problem? The cut is before from I started my gym time, trained my legs a lot. Got very strong thigs now, my thigs were a lot smaller when I made the cut... Just let the pants out on the side seam about 3/8" but didnt change anything else..

Hey Rory, Tried that out, followed exactly the instructions in your video. Same problem as before. Found there in google something about crotch length, maybe this can solve the problem. Seems like the same problem i have:

Sewed the fly on with 3/8" seam allowance... I also have to mention that I used a different cut, from "Müller und Sohn" from Germany.

do you mean that the side with the fly must be 1/4" wider and also the fork must be 1/4" longer than the other side? Both sides are equal

Well, now I remember from last time: Different pants but same cut, used a technique for the fly and the zipper from my university, but came out with the same problem...so probably the center front wont be the problem?

Went 2cm in at the center back, (so all in all 4cm tighter than before at the center back ) , now the trouser doesnt want to fall down anymore and sits very well at my hip. But now the pull in the front became even stronger and I guess there is also a problem at the back...

Hey Jeroen, Thank you for your reply! Yeah, I already got this..but I just want the banroll, because than I can design the waistband from the inside how I want.

Hey rory, yes, I want a full time internship (it’s also mandatory from university) regards paul

Hey Martin, Amann and leis are not available (talked to them) .. and I am thinking about going to another country where fashion has a much higher value than in Germany.. Regards paul

Hey Rory, That would be amazing! Got time from 1st of april until 30th of september. If everything goes well, I would quit my studies and stay for a longer time. Regards Paul

Yeah I am also following the caffeinated tailor on youtube. I will take a look at the shirt making series. Thank you!

Thank you! I will take a look at it..

So is it possible to work some chest in a 100% linen coat?

Hey Gerry, thats what I am doing at the moment. A lot of companies:/ tailors don’t reply. I guess I have to try a lot 😂 . Thank you very much

Thank you

Thank you Gerry! That makes sense.. didnt have the pockets in mind...

Okay got it, thank you both! before I forget it: rory leaved on the backtrousers much more Inlay than in the front trousers. When you want to make some alterations in the future, you just can let out the back trousers and not the front trousers.. notmally I would think that this takes a bad influence of the position of the side seam? Am I Right? I normally would think that when you want to let out the pants on the side, you have to do it hardly equally on the front and brack trousers…

Hey Gerry, thank you for your answer so far! this is what I mean with question number 2: why is the hem not straight?

Point 5: If you drop with the right shoulder, you will drop the shoulder in the right forepart also? Thought it would be better to balance both shoulders that they look the same..for example with a bigger shoulder pad on the right .

Hey Rory, Thank you for your reply :) Point 6: How much inlay would be the maximum to avoid issues with the garment?